Brand |
TP-Link |
Processor |
Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc |
Memory |
64MB DDR2 RAM, 8MB Flash |
Interface |
1 10/100Mbps Shielded Ethernet Port (LAN0/POE)
1 10/100Mbps Shielded Ethernet Port (LAN1)
2 RP-SMA
1 Grounding Terminal
1 Reset Button |
Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC |
Dimensions (W x D x H) |
198 x 74 x 40 mm |
Protection Level |
15KV ESD Protection 6KV Lightning Protection |
Port |
Fast Ethernet |
Wi-Fi Standard |
Wi-Fi 4 (802.11n) |
Wi-Fi Speed |
N300 |
Frequency |
2.4GHz |
Operating Modes |
AP / Client / Bridge /Repeater
AP Router Mode / AP Client Router(WISP Client) Mode |
Network Configuration |
WAN: Static/Dynamic/PPPoE/L2TP/PPTP
LAN: Static/Dynamic/Dynamic/DHCP
Forwarding: DMZ/ALG/UPnP/Virtual Server/Port Trigger
Security: SPI Firewall/Ping Forbidden/VPN/DOS Protection
Access Control
Static Routing
Bandwidth Control
IP & MAC Binding |
Wireless Configurations |
Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/
Short GI/Wi-Fi Multimedia |
System Tools |
Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute |
Management |
Outdoor Wireless Base Station
24V 1A Passive PoE Adapter
Pole Mounting Kit
AC Power Cord
Quick Installation Guide |