| Brand |
Asenware |
| AC INPUT |
220VAC 50HZ |
| DC OUTPUT |
24VDC typical |
| Voltage for MCU |
5V for power board MCU, 3.3V for others |
| Current at 24VDC from PSE |
450mA standby current |
| Maximum current from PSE |
2A except batteries charge |
| Batteries current |
1.85A maximum, current limited |
| Auxiliary output |
24VDC +/- 10%, 100 mA max,
current limited, monitored
|
| Batteries |
2*12V/ 2.3Ah sealed lead acid gel,
self-regulated
2*12V/ 7Ah if needed |
| Battery replace Resistance |
2Ω±10% if needed |
| Battery low-voltage protection |
21V |
| Detectors connection allowed each zone |
20 (except MCPs) |
| Zone alarm current |
6mA minimum/ 27mA maximum |
| Sounder output |
2*0.75A maximum |
| Fire protection |
100mA maximum |
| Fire routing |
100mA maximum |
| Fault routing |
100mA maximum |
| Communication protocol |
2 wires RS485 bus system |
| Relay contacts rating |
Dry contacts (NO/NC) 1A @24VDC |
| EOL resistor for zone |
6.8K 1W |
| EOL resistor for outputs |
6.8K 1W |
| Fuse on power board |
3A/ 250V glass tube fuse 20mm |
| Fuse on EMI board |
1A/ 250V glass tube fuse 20mm |
| Environmental |
Class A temperature range: -5 to 50°C
Humidity: 5 to 95% RH, non-condensing
|
| Terminal blocks rating |
All terminals rated for 12 to18 AWG
(0.75 to 2.5 mm2)
|
